HGYD-LE08-V3 conversion board controller is mainly used for the
receiving part of the video / image transmission
Product description
HGYD-LE08-V3 conversion board controller is mainly used for the
receiving part of the video / image transmission, the high-speed
serial LVDS signal decoding into parallel DP / EDP data, to
complete the data decoding function. The board transforms 8 pairs
of serial LVDS and the differential signal into DisplayPort data
output.
ØIndustrial grade, wide temperature parameter, operating
temperature: -35℃ ~ + 80℃
ØInput voltage 3.3V (Note: must check whether the power cord is
correctly connected before charging on the power supply, and
whether the power supply voltage is correct, otherwise the main
board will be damaged. )
ØInput signal type: supports the conversion of single and
dual-channel LVDS 6 / 8bit signal to EDP signal 2 and 4 lines.
ØEDP output signal: 2-Line / 4-Line e D P @ 1.62/2.7Gbps, the
highest resolution support to WXGA (25601600) 60HZ. Support for
most eDP interface screens on the market.
ØThe LVDS input interface is FI-X30 / standard 30 pin 215 pin /
mother seat / seat, which can be hooked directly attached to the
market universal LVDS output motherboard or connected with 30 to 30
lines.
ØLow-power consumption chip scheme, signal conversion only needs
70mW of power consumption, far less than other EDP schemes on the
market, with minimal heat generation.
ØImport of high-performance MCU control
ØFeatures: This card has the characteristics of simple operation,
reliable performance.
Product parameter details
| product model | HGYD-LE08-V3 | outline dimension | 50mm×50 mm×5mm(L×W×H) |
| interface type | EDP | display color | 24 bit(3×8,16.7M) |
| operation interface | Visualize the OSD operation interface | communication interface | I²C |
| control area | 640×480～1920×1200,WQXGA(2560×1600)Equal resolution of the LCD |
| working temperature | Operating temperature is: -35℃ ~80℃, storage temperature: -40℃ ~85℃ |
| Atmospheric pressure range of the working environment | 70kPa～106kPa | MTBF | >100000小时 |
| Display voltage | 3.3V/5V(Default 5V) | signal inpu | LVDS |
Packaging and transportation
Packaging details:
1. All products are packaged in the correct packaging for safety.
2.For small size products, we use tray = cartons.
3. For larger sizes, we use knife cards + foam + cartons.
4.We can also design packaging for customer request.
Transport
1. By express (3-7 working days), suitable for emergency time and
small amounts.
2. Marine transportation (15-30 days), suitable for routine mass
production.
3. Air transport (4-5 days), from airport to airport.
